 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
AncientCityBoatSales.com
SATURN inflatable boats and rafts are made of 1,100 Dtex New Generation
PVC fabric with a polyester support having excellent resistance to tearing,
tension and breaking.
PVC fabric with a polyester support having excellent resistance to tearing,
tension and breaking.
PVC vs Hypalon? While Hypalon is a good choice of fabric for inflatable
boats that will be used in commercial environment, or every day at extreme
weather conditions, our PVC fabric is economical and reliable alternative to
expensive Hypalon. PVC is easier to fix, it hold air better, it cost less, and new
generation of PVC is almost as tough as Hypalon. Hypalon has a very good
UV-resistance, however PVC treated with 303 Aerospace Protestant available
at West Marine stores and other retailers will match UV protection
characteristics of Hypalon.
boats that will be used in commercial environment, or every day at extreme
weather conditions, our PVC fabric is economical and reliable alternative to
expensive Hypalon. PVC is easier to fix, it hold air better, it cost less, and new
generation of PVC is almost as tough as Hypalon. Hypalon has a very good
UV-resistance, however PVC treated with 303 Aerospace Protestant available
at West Marine stores and other retailers will match UV protection
characteristics of Hypalon.
SATURN inflatable boats and rafts are hand-sealed at
the seams for perfect seaming-the most expensive and
reliable method used today. Each seam is
strengthened with four layers of bonded fabric for
maximum strength and durability. SATURN seams are
virtually indestructible and will not fall apart even after
many years of use in any weather.
the seams for perfect seaming-the most expensive and
reliable method used today. Each seam is
strengthened with four layers of bonded fabric for
maximum strength and durability. SATURN seams are
virtually indestructible and will not fall apart even after
many years of use in any weather.
Technical Specifications of PVC Fabric:
Outside PVC layers
Abrasion resistance;
Extreme condition
resistance;
Chemical resistance
Abrasion resistance;
Extreme condition
resistance;
Chemical resistance
- Adhesive structure
- Polyurethane glue
- Cold welding
- Made by hand
- Four layer reinforced
seams
- Polyurethane glue
- Cold welding
- Made by hand
- Four layer reinforced
seams
All SATURN inflatable boats, rafts and kayaks use
1100 Dtex polyester fabric which has been
specially coated on both sides with PVC.
1100 Dtex polyester fabric which has been
specially coated on both sides with PVC.
Inside high polyester fabric offers:
Dimensional stability
Tensile and tear strength.
Dimensional stability
Tensile and tear strength.
Abrasion resistance:
The chemical formula of the
outside PVC layer makes the
material abrasive resistant and
airtight properties: 200*170
N/5cm(± 20)
The chemical formula of the
outside PVC layer makes the
material abrasive resistant and
airtight properties: 200*170
N/5cm(± 20)
Chemical resistance:
Strong resistance to Hydrocarbon,
Sunlight, Seawater, Oil and Fuel.
Thanks to this properties which
protect the material from fading
and ageing.
Strong resistance to Hydrocarbon,
Sunlight, Seawater, Oil and Fuel.
Thanks to this properties which
protect the material from fading
and ageing.
Extreme condition resistance:
Low & High temperature
resistance:
-30 + 70°C
Low & High temperature
resistance:
-30 + 70°C
Dimensional stability:
1% (24hrs-70°C)
Tensile and tear strength:
3800*3550 (± 250)
1% (24hrs-70°C)
Tensile and tear strength:
3800*3550 (± 250)